Filter by tags
Questions, Articles and Polls
1 Like
·
1 Answer
A:
Air Cooling Coil Coating is not known to harm any existing factory coatings.
... more
2 Likes
·
1 Answer
A:
• It doesn’t exist. The cooling provided from the new patent pending pan chiller system provides a more precise and uniform control of cooling by means of a single-state (liquid) coolant.
... more
2 Likes
·
1 Answer
A:
A. Through factory, field and laboratory testing there have not been any negative results with regard to moisture carryover, moisture removal or condensation. Bronz-Glow coatings do have the effect of allowing free flowing and less susceptible to
... more
2 Likes
·
1 Answer
A:
safest and easiest way to unclog that drain is to go to the drain tube located at the lower portion of the firewall on the passenger side and, using a compressed air, or something rigid but flexible and either spray the air into that drain tube or
... more
2 Likes
·
1 Answer
A:
According to AC4Life, the cost of an evaporator coil can vary depending on the various sizes and types that you select.
... more
2 Likes
·
1 Answer
A:
All chillers made by Current-USA use titanium heat exchangers that provide the highest protection from the corrosive elements in saltwater.
... more
2 Likes
·
1 Answer
A:
I had to replace my Refrigerator Evaporator Fan (GE part WR60X10074) but it turned out that the problem was the system board (I hope). Anyway, my question is, how does the motor fan work. I see it is DC 9.7V and 3.25W. There are four wires that go
... more
2 Likes
·
1 Answer
A:
A. No. Factory, field, and laboratory tests have not shown any negative effects on moisture removal, or condensation. Bronz-Glow coating does have the effect of allowing condensation to become freer flowing and less susceptible to being carried
... more
2 Likes
·
1 Answer
A:
The life span and overall maintenance of the air conditioning clutch can have a lot of impact on the life and efficiency of the vehicle's entire air conditioning system. It is important to understand how to inspect and change your vehicle's air
... more
2 Likes
·
1 Answer
A:
Sap is fed into an evaporator unit and kept at a constant level by a float. Evaporators can be heated by a variety of fuel options, including wood, oil and natural gas. The sap moves up and down channels in the evaporator unit, becoming darker as
... more
1 Next