Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

gph

Question tag: gph 35 Questions

0 Votes 1 Ans

Why must I fill my fuel tanks at least 70% percent to get credit for an annual 0.1 gph test, if I normally never keep that much fuel in the tanks?

annual credit FUEL gph tanks Test

0 Votes 1 Ans

Since the combined flow to the sump directly below the tank should be around 1200 GPH, would this be too much flow for a refugium housing only Chaetomorpha?

chaetomorpha combined directly flow gph HOUSING refugium sump tank

0 Votes 1 Ans

What is the GPH (gallon per hour) capacity of the pump?

gallon gph hour pump

0 Votes 1 Ans

Im building a horizontal type of scrubber, where the water and algae will only be on the top side of the screen. Can I use half of the 35 gph per inch recommended flow?

algae building gph Half horizontal screen scrubber type water

0 Votes 1 Ans

I know more flow is better but how do I calculate adequate gph for my tank?

adequate CALCULATE flow gph tank

0 Votes 1 Ans

How much gph should the tank have and what brand name pump would you use?

brand gph pump tank

0 Votes 1 Ans

Would one be good since it says it pumps about 2250 gph on top of my 1200 gph Im already getting?

0 Votes 1 Ans

Does a 1″ overflow allow for 600 gph?

0 Votes 1 Ans

If my planned set-up does not work for reasons you will explain, can you please suggest how I would set-up a manifold with my 1200 gph overflow or is my only option a submersible?

explain gph Manifold overflow planned reasons set-up

0 Votes 1 Ans

inflow rate of 400 GPH (?), does a return pump of 725 sound about right?

gph inflow pump rate Return right sound

0 Votes 1 Ans

Please note my emperor is a 280 gph and adds lots of surface agitation-not sure if its too much because i am getting air bubbles-is this also harmful?

adds emperor gph lots note sure

0 Votes 1 Ans

Is this enough gph per manifold, or should I go to a mag 24 pump?

gph mag Manifold pump

0 Votes 1 Ans

Will 3 2″ free flow piping handle 3000 gph?

flow Free gph Piping

0 Votes 1 Ans

The second pump in the dirty water portion would also be used to pump dirty water into the pre-filter box before the 1200 GPH pump returns it to the spraybar. Sound okay?

Box dirty gph portion pre-filter pump Used water

0 Votes 1 Ans

If I want to have a pump that can handle about 1000 gph on the return, what can I do?

gph pump Return

0 Votes 1 Ans

Also, with the refugium section in the middle, would the 1000 GPH going through it be too much?

going gph middle refugium section

0 Votes 1 Ans

As for the filter: the AquaClear 50 is rated at 200 gph, while the Ecco Canister is rated for 127 gph. I guess Im confused as how the latter would be more flow?

aquaclear canister ecco filter gph guess rated

0 Votes 1 Ans

What is a good brand of pump for approx 500-600 gph?

Approx brand good gph pump

0 Votes 1 Ans

On one hand, 400 gph would certainly do a decent job, but how much better than 265?

certainly decent gph hand Job

0 Votes 1 Ans

Is the sacrifice in space (2 inches larger) worth the extra 140 gph?

extra gph inches larger Sacrifice worth