All of our medallions and other products have a grout spacing of approximately 1/16" between shapes. ... more

If you’ve read any of my other posts regarding grout you have more than likely seen me state that epoxy is different. This subject is no exception. Epoxy grout will actually add to the stability of your tile installation – to an extent. Epoxy will ... more

There are a lot of different ways to remove dried grout from new tile. You can view some options in the discussion at, www.diynot.com/forums/viewtopic.php?t=135. I have used a scrapper before, and it worked quite well. ... more

Answer The adhesive is the glue with which the tiles are laid on the ground or fixed to a wall. The type of adhesive required depends on the surface to which they are being fixed. The grout then is used to fill in the gaps between each of the tiles. ... more

How do I clean stained tile grout?Cleaning stains on the surface of ceramic tile is relatively easy, as long as the surface is glossy or semi glossy. Even dried latex paint comes off with a fingernail. But therein lies the difference between tile ... more

• No. This product is NOT registered with the EPA as a disinfectant or sanitizer. ... more

• SC Johnson Professional™ Grout Cleaner is a bleach-based cleaner that whitens and brighten discolored grout. ... more

A. It is recommended that a flexible caulk be used to fill the 1/4" gap along the perimeter or at a threshold. ... more

Yes you need at least 600 PSI Portable or Truck mounted carpet cleaning equipment. Its recommend 1200 PSI but if you use our oxyblaster chemical you only need 600 PSI. ... more

Whether one is referring to a home, restaurant, hospital, office, or many others, tile and grout flooring catch visitors' attention instantly as they walk on it. Moreover, grout lines are porous in nature and easily absorb grease, dirt, mold, ... more