Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
Compact fluorescent lamps exist today in many sizes and shapes to replace incandescent bulbs. Where there is indeed too little room for any compact fluorescent lamp to fit in, improved halogen bulbs could be used to replace incandescent bulbs.
... more
2 Likes
·
1 Answer
A:
Each set of Lawn Lights has 50 lamps. This may not sound like very many lamps, but each set of Lawn Lights will cover 4000-5000 square feet (or less). One of the great things about Lawn Lights is that it gives the illusion of having several hundred
... more
2 Likes
·
1 Answer
A:
Untrue, there are compact fluorescent lamps on the market that can be dimmed, and there are dimmers that can dim any compact fluorescent lamp. Consumers should carefully read product information concerning dimmability. Improved halogen lamps will
... more
2 Likes
·
1 Answer
A:
Longest length of a fluorescent tube lamp is 8' long while the shortest can be 4". The most typically used lamp size is 4'. Typical diameters are: • 5/8" (T-5) - having a high output light source and becoming more popular for a typical lighting
... more
2 Likes
·
1 Answer
A:
While compact fluorescent lamps (CFLs) are initially more expensive, you should see a quick return on your investment when you replace your most frequently used incandescent light bulbs with CFLS. A 26- or 28-watt compact fluorescent lamp (CFL) can
... more
0 Likes
·
1 Answer
A:
A CFL includes a lamp and ballast while an incandescent bulb does not include a ballast. While many CFLs in the market are larger than their incandescent equivalent bulbs, Lightingandceilingfans.com carries some of the smallest CFLs in the market.
... more
2 Likes
·
1 Answer
A:
Yes. Due to thermal and operating requirements the induction lamp needs to be properly installed in a suitable fixture. Many existing fixtures can be successfully retrofitted.
... more
2 Likes
·
1 Answer
A:
Traditional Arc lamps use an electric arc inside a mercury gas to excite atoms, which then decay, emitting photons. Microwave lamps excite the gas via microwave emission.
... more
2 Likes
·
1 Answer
A:
Yes, the device is tested at design voltage specified by the manufacturer. A warm-up time may be required, usually 10 or 30 minutes after applying voltage.
... more
2 Likes
·
1 Answer
A:
No, DOT does not certify lamps. Unlike ECE, there is no type-approval process. DOT only requires that the manufacturer takes "due care." This means that at the beginning of production, the manufacturer must certify its lamps comply with FMVSS and
... more
1 Next