Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Alternator Regulator/Brush Reliability. [Inquiry] Is it wise to preventatively change out a 10 yrs old voltage regulator now?

0
Posted

Alternator Regulator/Brush Reliability. [Inquiry] Is it wise to preventatively change out a 10 yrs old voltage regulator now?

0

[Response: Gary DeFrancesco] The regulators themselves are fairly robust. It is the attached carbon brushes that wear out. If let go too far, the bushes become ineffective and the alternator stops charging eventually. I would pull the regulator/brush assembly out and have a look at it. If the brushes are less than about 3/16″, I would go ahead and replace the assembly. An aftermarket assembly costs about $20. A Bosch unit runs about $50. I have installed both in my 2 745Ts this year. So far both are working fine. My gut feel is the Bosch assembly is going to last longer, but time will tell. I know there are those who say the brushes can be replaced and the regulator reused. If you have the tools and want to spend the time, go ahead. However, I do not know how much longer the electronics in the regulator will last. With all the heat under the hood, the electronics will eventually fail. Will they last through a second set of brushes, I don’t know. So I just bypassed the question and put

Thanksgiving questions

*Sadly, we had to bring back ads too. Hopefully more targeted.