Are Plain Gold Bands the only types of Rings that can be stretched?
Nope! (But they should be!) I have seen Jewelers stretch up practically any and all types of Rings before. Rings with Designs, Etchings, Carvings, Beads, Intricate Details… You name it. With these types of Rings, you have to be careful! Anytime you stretch a band with designs, you are also stretching that design and pulling on those Carved Walls and Etched Mountings, and it can make it look pulled and stretched or elongated. The Ring’s Clean Lines and Knife Edges may look Bowed or Warped. It could break your beautiful Carvings and damage your Ring all together. It’s just not good! You just never know what you’re getting into when you stretch a Ring with a design on it. If you really must stretch one of these bands, try to never go bigger than 1/2 size up. If you need more than that, Special Order it in the correct Ring size. Because if the Ring gets messed up and damaged, it’s almost impossible to fix it and make it look good again. Don’t try it! And if you have Diamonds or Gems in y
