Are the hose and fittings standard NPT thread?
Some system manufacturers use metric hose ends and fittings. Special adapters are required to adapt to NPT bearing inlets causing increased costs and labour and possible delays during servicing. All FLO system hose and fittings are standard re-usable NPT threads. Does the pump reservoir incorporate a revolving paddle or a follower plate? A FLO pump with transparent reservoir and revolving paddle eliminates grease cavitation (air bubbles in the grease that can cause system failure if they enter the system) and offers visual grease level monitoring. It also functions as a visual indicator to the operator that there is a problem if the paddle stops turning. Does the system include a pressure gauge? A pressure gauge allows for visual monitoring of the system pressure during regular maintenance inspections. For most system manufacturers, a pressure gauge IS NOT supplied as standard – it must be specified. Every FLO system comes standard with a pressure gauge installed at the pump. How are t