Are there different types of core density and steel mesh styles available for the EVG-3D Panel?
The dimensions of the panels are manufactured from a starting width of 1200mm x up to 6000 mm length in 200 increments. Truss wire gauges available are 280mm, 320mm and 355mm. Polystyrene Core are normally 40, 50, 60, 80 and 100 mm thick. Outer Layer Wire Thickness Mesh to Mesh 50mm, 64mm, 76mm, 89mm, 100mm, 127mm. How is the Tridipanel secured into the slab? The rebar is embedded within the concrete slab. The panel is placed over the rebar, through the open space between the polystyrene core and the wire mesh. Once set, the rebar is fastened directly to the wire mesh by hand with tie wire. It is critical the rebar be installed in a straight line so the rebar fits easily into the cavity between the polystyrene and the wire mesh. It is important to make sure the rebar is completely exposed so it becomes monolithically enclosed with the shotcrete or cement application. Should the building department or engineer require additional tie downs, the polystyrene core can be removed from the ba
