can a 1 inch block intials on a golf shirt be removed and redone?
WholesaleMonograms.com Support answers: If you have Peggy’s Stitch Eraser – a device like an old-fashioned electric razor – and are VERY patient, you might try trimming away from the back side of the design. If you are even more patient you might try snipping the bobbin thread from the back. To be honest, it’s very unlikely that you will be able to remove the design without either inadvertently snipping the fabric or at least compromising it. Many monogrammers save these “mistake” shirts for future use for sampling. Some suggest that even with a hole in the shirt another design – one that is larger and has a full filled area – a crest is a good example – can be sewn over the spot.