Can employees check the fit of their own respirator?
Yes, employees using tight-fitting facepiece respirators are required to perform a user seal check each time they put on the respirator. They must use the procedures in Appendix B-1 of 29 CFR 1910.134 or procedures recommended by the respirator manufacturer that the employer demonstrates are as effective as OSHA’s procedures.
Yes, employees using tight-fitting facepiece respirators are required to perform a user seal check each time they put on the respirator. They must use the procedures in Appendix B-1 of 29 CFR 1910.134 or procedures recommended by the respirator manufacturer that the employer demonstrates are as effective as OSHA’s procedures. Note that a fit test is a method used to select the right size respirator for the user. A user seal check is a method to verify that the user has correctly put on the respirator and adjusted it to fit properly, as illustrated below.
