A:
1 Answer
rank
1
|
Not directly. Since 100VG uses demand priority polling and 100Base-T uses Carrier Sense Multiple Access with collision detection, the technologies can not directly communicate. To connect a 100VG network with a 100Base-T network, you will need a device such as the HP Advancestack Switch 2000 (product number J3100B) with the HP Advancestack Switch 2000 100VG Module (product number J3103A) and HP Advancestack Switch 2000 100Base-T Module (product number J3191A).
more
|
hewlettpackard.com
1 more source
-
h40060.www4.hp.com
Related Videos
Add your answer...
Top Answerers
1.
2.
3.
Top Askers
1.
2.
3.
Top Supporters
1.
2.
3.
Can I connect a 100VG LAN Adapter to a 100Base-T hub?
Related Questions
- The auto-negotiation signals of some 100Base-T devices may cause the HP J3234A 100Base-T Hub-12tx and HP ...
- Although the theoretical maximum transfer rate of 100Base-T Ethernet is 100 Mbps, the effective throughput is ...
- Cat5 cable is a twisted pair high signal integrity cable. Its transmission distance depends on the data rate ...
- No. Transceivers need to be ordered separately so that the customer can have whatever type is desired; UTP or ...
- The Advancestack Hub-12TX/TXM can be connected to an external Switch 800T. The maximum distance is 100 meters ...