Can I (Robindar) get a factory finish by spray painting wood with aerosol spray paint?
Yes but there is more to it than just spraying paint. Ideally one needs at least three thin coats of spray paint. Between each coat one must use a super fine grit sand paper to ‘knock’ the paint down, followed by a damp (very damp) rub off of the dust, more spraying, more fine sanding, a rub. To get that deep shine, requires several coats of poly clear coat, again you can spray, fine sand, wipe, spray, fine sand spray, wipe. Personally I never ever paint wood. I stain (mostly rag rarely a brush) followed by many seal coats with a clear coat finish.
