Can Integrity™ fence panels be cut into a narrower width?
Yes. The horizontal SmartRail™ of a fence panel can be cut at any point to create a narrower-width panel. This is a good thing, because a fence line does not usually measure to the exact inch the total linear feet of panel material on hand. Typically, a panel needs to be cut or trimmed on site. Often, such trimming is planned ahead. For instance, a piece of a trimmed panel can be used as a filler when a gate is going to be installed inches away from the wall of a house, requiring a narrow piece of panel to fill the gap. When cutting fence panels, the horizontal SmartRail™ needs to be re-notched to fit into the punched holes of a post. A power hacksaw can make this easy! With product versatility like this, ”scrap” material is minimized. Better yet, unforeseen layout changes are usually manageable without putting the installation project on hold.