Can you suggest a heavy-duty paint for painting the floor of an industrial building? The current paint lasted only a few months.
We recommend our Heavy-Duty ArmorSeal Floor Coatings. Surface prep is important. For best performance, remove the old coating using a shot blaster. This will remove the old paint and give an excellent profile, which the new finish can adhere to. If you are unable to do this prep, there is ArmorSeal water-based epoxy primer that can be used as an intermediate coat. I suggest you test both products in a small area to assure no lifting of the old coat. Apply the base coat of primer, topcoat, wait 24 hours, and then check the adhesion. Always follow the manufacturer’s label instructions for mixing and application.