Controller axis missing?
First – Delete the control.cfg file in your player folder Second – When you start GPL, another control.cfg will be created. Third – In the Calibration window run the axes through their ranges. Fourth – Only now can you assign the axes in the GPL game controllers window. – If that doesn’t work, you should use the GPLShift utility if you have several controllers attached at the same time. Controller pedals won’t go to split axis and three axes actually appear for the throttle and brake See this thread > Post #6. Download DXTweak2 and use it to “fudge” the combined axis of the pedals, by setting both max and min values to 0. Looking at the input screen then shows the Direct Input from the combined axis sitting all the way to the right, whereas the separate axes work as normal.” Thanks to Tim Nightingale. You might need to use lower values than 0.
First – Delete the control.cfg file in your player folder Second – When you start GPL, another control.cfg will be created. Third – In the Calibration window run the axes through their ranges. Fourth – Only now can you assign the axes in the GPL game controllers window. Controller pedals won’t go to split axis and three axes actually appear for the throttle and brake See this thread > Post #6. Download DXTweak2 and use it to “fudge” the combined axis of the pedals, by setting both max and min values to 0. Looking at the input screen then shows the Direct Input from the combined axis sitting all the way to the right, whereas the separate axes work as normal. Thanks to Tim Nightingale. You might need to use lower values than 0.