Do the EB13D7 and EB15D7 series oscillator offer output tri-state capability?
Both of these product series offer a tri-state output capability. The output is three-stated (tri-state condition) when the voltage at the control pad is set to a logic low state. In this condition, the oscillator continues to operate, but the output pin is now in a high impedance state. If the voltage at the control pad (pad 1) is set to no connect or a logic high state, the output (pad 3) is enabled (clocking). Note: The oscillator has an internal pull-up resistor on the control pad (50k ohms typical).