Does Codima Discovery Engine and autoMap drawing facility support Link Aggregation (MLT, EtherChannel, ISL etc)?

The IEEE 802.3ad standard defines how two or more Gigabit Ethernet connections can be combined to load share, load balance and provide better resiliency for high-bandwidth network connections. This is an industry wide standards, however some vendors have used proprietary techniques to group together multiple slow-speed ports to get a faster point-to-point logical link. This means the discovery has to look in the vendor part of the MIB tree to find out if the links are bundled, so to fully support this feature some customization may be required. Can the Codima Discovery Engine support NAT'ed IP ranges ? - i.e., to look for shareable applications in this domain Due of the nature of NAT networks the autoAsset application will retrieve the ARP table from edge NAT router but will not talk to any of the devices in the NAT subnet. There are 2 solutions Install the autoAsset application on a PC within the NAT subnet and do a discovery for that subnet. Create a VPN connection from the remote ...

The IEEE 802.3ad standard defines how two or more Gigabit Ethernet connections can be combined to load share, load balance and provide better resiliency for high-bandwidth network connections. This is an industry wide standard, however some vendors have used proprietary techniques to group together multiple slow-speed ports to get a faster point-to-point logical link. This means the discovery has to look in the vendor part of the MIB tree to find out if the links are bundled, so to fully support this feature some customization may be required. Can autoMap provide port connection information? Yes, see below:- Can I used autoMap to obtain Asset reports? Yes, but you will need the autoAsset Add on. The discovery process used by the autoMap tool provides both asset and topology information, with the autoAsset Add on, you are able to access the full range of asset information as HTML Reports. Can the Codima Discovery Engine support NAT'ed IP ranges ? - i.e., to look for shareable ...