Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How can I install the 510 or 530 on a non-Windows operating system?

0
10 Posted

How can I install the 510 or 530 on a non-Windows operating system?

0
10

A2: You need to upload the configuration from the Setup page of the modem Web interface as described in the User Guide. If you have some parameters supplied by your ISP (user name, password, IP addresses), you need to enter these parameters from the modem Web interface after uploading. To upload a configuration file: • select the suitable ini file as described in Q2. • upload the file from the modem Web interface To enter the user name and the password • if your ISP has provided a user name and password for your ppp connection, go to Basic – Connect page • Click Disconnect • Enter the user name and password • Click Connect • Click Save All To enter the LAN address of the modem • If you have a public IP address range allocated by your ISP for your LAN or you have a private LAN that is not in the 10.0.0.0 subnet, go to Advanced Static Routing page • On the IP address table, click New • Leave the interface as Eth0 • Enter the address that you want to assign to your modem and your LAN subn

Thanksgiving questions

*Sadly, we had to bring back ads too. Hopefully more targeted.