How can I prevent fogging inside of the camera lens?
Humid air or small water drops trapped inside the waterproof camera may condense on the cooler glass lens port and cause fogging. Here is the best way to prevent fogging: • Keep the inside of the camera perfectly dry. Make sure you and the camera are dry before opening the waterproof door. Even one small water drop that drips into the camera can evaporate and condense (fog) on the lens port. • Avoid opening the waterproof door in high humid areas. Load the batteries and SD memory card in a dry environment, like an air-conditioned room. This will help to avoid trapping humid air inside the camera. • If you do experience fogging or if a water drop gets inside the camera, insert two fresh Moisture Muncher desiccant capsules (item # SL911) inside the battery compartment for at least 24 hours. It is highly recommended to store the camera with fresh Moisture Munchers in the battery compartment, to keep the camera optics and electronics clean and dry. See your local SeaLife dealer to purchase