How do i bridge my amp?
If you have two subs, you can only wire them series for 8 ohms as in paralell they would be 2 ohm and the amp cannot tolerate this. You might be better off just running a sub per channel as it will be the same power as wiring both sub series with an 8 ohm load. Be sure to set the gain or level control right. The purpose of the gain is to match the RMS volts of the source (CD player, etc.) to the input of the amp to prevent clipping and have better power matching. Here is a guide that will help you to set the gain correctly http://www.datafilehost.com/download.php… You’ll need Microsft Excel to use it.