How do I change the mA range on my Fluke Process Calibrator/Meter to 0-20mA or 4-20mA?

0
Posted

How do I change the mA range on my Fluke Process Calibrator/Meter to 0-20mA or 4-20mA?

0

Fluke 705 – Press and hold the up arrow button (▲) on power up until the new mA zero value appears on the display. Repeat to change back. Fluke 707 & 707Ex – Press the “MODE” button on power up, you can release the buttons after unit powers up. Fluke 715 – Select the “Output” zero value and press and hold both up arrow buttons simultaneously (▲▲) to store and repeat for the span value. Fluke 787 – Press and hold the “RANGE” button on power up. Fluke 789 – Press and hold the “RANGE” button on power up. Fluke 725, 725Ex, 726 – In the Output mode select the desired zero value and press and hold the “0%” button for ~3 seconds. To set the span, select the desired value and press and hold the “100%” button for ~3 seconds. Fluke 772 & 773 – Press the shift button to activate ▲, ▼, ◄, and ► to adjust the source output. Long press the 0% or 100% button until the percent value changes to either 0.0% for zero or 100.0% for span.

Related Questions