Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I change the mA range on my Fluke Process Calibrator/Meter to 0-20mA or 4-20mA?

April 26, 2017calibrator fluke ma meter process range

0

Posted

How do I change the mA range on my Fluke Process Calibrator/Meter to 0-20mA or 4-20mA?

1 Answer

0

Posted

Fluke 705 – Press and hold the up arrow button (▲) on power up until the new mA zero value appears on the display. Repeat to change back. Fluke 707 & 707Ex – Press the “MODE” button on power up, you can release the buttons after unit powers up. Fluke 715 – Select the “Output” zero value and press and hold both up arrow buttons simultaneously (▲▲) to store and repeat for the span value. Fluke 787 – Press and hold the “RANGE” button on power up. Fluke 789 – Press and hold the “RANGE” button on power up. Fluke 725, 725Ex, 726 – In the Output mode select the desired zero value and press and hold the “0%” button for ~3 seconds. To set the span, select the desired value and press and hold the “100%” button for ~3 seconds. Fluke 772 & 773 – Press the shift button to activate ▲, ▼, ◄, and ► to adjust the source output. Long press the 0% or 100% button until the percent value changes to either 0.0% for zero or 100.0% for span.