How Do I configure EZBackup.com to work through non-SOCKS proxy servers?
[return to top] In order for the EZBackup.com client to be used with an application-based proxy firewall server, the firewall must be set to permit outbound TCP connections for a generic application. Mapped firewalls require a separate port on the firewall for each different destination address. The IP addresses that must be mapped will appear when you attempt to run the client software, or can be seen by selecting Options/Connection…/Firewall in the client software. The destination port number is always 16384. The firewall administrator may choose any available port numbers on the firewall. Finally, the EZBackup.com client must be configured with the IP address or the DNS of the firewall and the firewall port numbers that were chosen. When prompted by the EZBackup.com client to select a Firewall option, select the, “Use proxy firewall server(s)” radio button. Then enter the firewall mapping that was configured on your firewall: Enter the IP Address or DNS of your firewall into the “
