How do I configure MegaTune for the Innovate LC-1 or LM-1 / LM-2?
For a long time we guided customers on how to re-program their LC-1 / LM-1 / LM-2 to output a slightly different signal from default. The goal of this was to increase the resolution of the signal in the range of AFR most users will spend their time in. What we had recommended was to program the output you were using to send a signal that represented a 10-20:1 AFR from 0-5v. While in theory this is great and does increase resolution a bit, in practice it’s not really needed and is probably more trouble than it’s worth for most users. The benefit of this is almost immeasurable, so going forward we recommend leaving the analog outputs on your LC-1 / LM-1 / LM-2 at their default settings. Then to configure your MegaSquirt to talk to your LC-1 / LM-1 / LM-2 do the following: • First in the MegaTune Configurator you need to select Innovate Default. • Then in the MegaTune EGO settings select ‘wideband sensor’. Later you can come back and use the MegaManual to tune the rest of the settings on
