Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I configure the Alcatel SpeedTouch Home Ethernet modem for BellSouth?

0
Posted

How do I configure the Alcatel SpeedTouch Home Ethernet modem for BellSouth?

0

Note: It should not be necessary to configure the modem if it was purchased directly from BellSouth. This installation guide will assume that the modem is set to the factory default IP address of 10.0.0.138. If that is not the case or you are unsure, you will need to perform the “Ping-of-Line” procedure outlined in section 6.1.1 of the SpeedTouch Home Users Manual to reset the IP address to the factory Default, before continuing with these instructions. You will also need to insure that the modem is connected to the network card in your PC and powered on. See Chapter 3 in the SpeedTouch Home Users Manual for more details. •Make sure that the network card in your PC that the modem is connected to is assigned an IP address in the 10.0.0.x range with a subnet mask of 255.255.255.0. Please refer to the SpeedTouch Home NIC Configuration FAQ if you are unsure how to accomplish this task. •Open your browser and point it to the IP address of the Modem (10.0.0.138) You should see the modem conf

Related Questions

Thanksgiving questions

*Sadly, we had to bring back ads too. Hopefully more targeted.