How do I connect Iplex PRO-FIT™ to a gas or electric hot water system?
It is recommended that the Iplex PRO-FIT™ system be installed in accordance with the water heater manufacturer’s installation requirements, AS 3500 part 4 and any local by-laws. Particular reference should be made to the pressure and temperature relationship as described in AS/NZ 2642 and detailed in working pressure table in the &Heat and Pressure Performance& section. The valves used in the installation of water heaters, should comply with the requirements as laid out in AS 3500 part 4, Tables 4.1 & 4.2. The required set pressure of valves i.e.