How do I connect tv dvd and vcr with scart.?
Firstly look on the back of the combo & the DVD rec to see if you have a HDMI slot (your TV will have) if so connect in this manner. 1. Aerial lead from outside to first unit (say combo) 2. Fit small looped aerial lead from combo to DVD unit and 3. Finally a aerial lead from last unit to TV This all permits a continuous circuit. It makes not a scrap odifferencece which way scarts are connected, whichever you use most make thatheeh prime fitting; from unit up to TV plug in to back of TV. This is how you ‘connect them together.’ If HDMI just follow steps and replace scart leads for HDMI or 50/50 whichever is available. It should take you no more than a couple of minutes to complete.