How do I install NTS EnterNet 300 with an Alcatel modem?
•Install the NIC. •Load the NIC drivers. (from floppy, cd, etc.). •Reboot if prompted. •On your open the Network Properties dialog box. (from Control Panel select Network or right click Network Neighborhood on your desktop and select Properties) •Select the TCP/IP that’s connected to your network card and click Properties. •Select the “IP Address” tab and select “Specify an IP address” and insert “10.0.0.1” for “IP Address” and “255.0.0.0” for “Subnet Mask”. •Select the “WINS Configuration” tab and select “Disable WINS Resolution”. •Select the “Gateway” tab and remove any gateways installed. •Select the “DNS Configuration” tab and select “Disable DNS”. •Select the “Advanced” tab and check “Set this protocol to be the default protocol”. •Select the “Bindings” tab and uncheck “File and printer sharing for Microsoft Networks” as well as “Client for Microsoft Networks”. You will need “Microsoft Family Login” or something else to bind to TCP/IP; otherwise you’ll get an error. For file and p