How do I install PIR133 with the bootable hard disk drive connected to the motherboard?
If you are booting from a HD not attached to this card, say a HD attached to your motherboard, you need to set up the RAID in the BIOS before loading Windows. You need to press F3 when the computer first start up. After you set up the RAID, go into Windows, and “Add New Hardware” go through the process. Remember to attach the HD you want attached to the card for the whole process. Q: How do I install PIR133 with the bootable hard disk drive connected to the PIR133 card? A: If you want to boot the system from the HD connected to the PIR 133 card, you have to install Windows to that HD. Before starting the installation, you have to make a floppy disk with the driver on it. You should copy the folder, 571B under MultiIO; or the folder, SIL680RAID, under Silicon Image onto a floppy disk. It depends on which driver CD came with your PIR 133 card, since we have 2 different CD versions. Then you connect the HD to the card and start the computer. Before you can load into Windows, you need to p
Related Questions
- I connected my MacBook Air Software Reinstall Drive to a hub or USB switch and it won install. What is the best way to connect the MacBook Air Software Reinstall Drive to my computer?
- I have a 1000TL/2 with Smart Drive connector on the motherboard. How can I install a drive larger than 40 Meg?
- How do I install PIR133 with the bootable hard disk drive connected to the PIR133 card?
