How do I install the Xircom® USB to Ethernet hardware and drivers?
• With Windows running, plug your Xircom USB to Ethernet adapter into an available USB port. You should see a window stating “New Hardware Found”. • Put your Xircom Drivers floppy disk in drive A: and click Next. • Click Next Again. • Make sure only the “Floppy disk drives” box is checked, then click Next. • Windows may ask where the files are more than once. Type or select A: in the box, then click OK. Always point to the A: drive first when Windows asks for files during the installation, since most of the files are on the floppy disk. • When the files are finished copying from your floppy, click Finish. • You will be asked if you want to restart. Answer Yes. At this point your installation of the Xircom converter is complete. • Now you need to install networking. Many books are available on this subject. Simply treat the Xircom converter like it was any other type of Ethernet adapter. • For general Microsoft networking support, try the Microsoft* Support Web Page*.