How do I make applications designed for hand held devices print on the Extech Printer?
In order to be able to print from a hand held device to an Extech Printer a third party software is necessary. For Windows CE, Pocket PC or Windows Mobile operative systems, visit www.fieldsoftware.com * * * The Printer gets hot and stops printing and it does not start printing until after it cools down. As a preventive feature, the print head on the Extech printer will stop printing when its temperature gets too high. It will not start printing again until the printer has cooled down. That is why it is recommended that the printer is not left exposed to direct sunlight or in proximity to hot objects such as a car motor etc. Refer to the Users Manual for complete maintenance information. * * * After finishing the print job the printer sends a few hex characters to the host application. There is a special section in the Developers Manual which deals with control characters. One of them is the EOT character which the printer sends back to the host device when the buffer is empty. The rea