How do I make the motion detector floodlight unit work properly?
MOTION DETECTOR (X10:PR511, LEV:6417) is a useful device that functions as both X10 receiver and transmitter. It contains a sensor head to detect motion, an X10 receiver to turn on the attached floodlights, and an X10 transmitter to turn on up to four X10 units when motion is detected or four other X10 units at dusk and off again at dawn. It also has a shutoff control with a variable timer to turn the lights (and remote units) off after motion has stopped. It has a photocell control with variable sensitivity to determine when dusk and dawn occur. The most common problems with the motion detector can be solved by reading the short owner’s manual that comes with it. This may seem obvious, but the answers to the most frequently asked questions are in fact in the manual. If the detector does in fact detect motion during daylight hour and you want it to do so only at night, you need to adjust the DUSK control. Note that each time you change this, the new value will not become effective for