How do I record multiple MIDI or Audio tracks simultaneously, or send different tracks to separate ports?
If you are recording MIDI, PowerTracks Pro Audio will not record on multiple tracks, but you can record to one track and then use the Edit | Extract Channels to Tracks command to split the track into multiple tracks. This works if there is multiple channel information in the MIDI Stream. If you are recording audio, you can record either mono (left or right) or in stereo. To access these settings, go to Options | Preferences | Audio. If you are recording both left and right channels, and your audio track is set as a MONO Audio track, the left and right channels will be recorded on to consecutive tracks. If your track is a STEREO Audio track (PowerTracks Pro Audio 8 or higher), then both channels will appear on a single track. If you have a sound card or audio interface that has more than one input port, you can record from each port on a separate track. You can record as many tracks simultaneously as your hardware supports. To set this up in PowerTracks, go to Options | Preferences | Au