How do I remove my Solatube Daylighting System diffuser?
Your ceiling diffuser is easy to remove and clean. Please note that older Solatube Daylighting Systems (Installed before the year 2000) have twist-lock diffusers for the 10 in/250 mm & 14 in/350 mm models. For these older units, the diffuser twists off counter clockwise when looking up at the diffuser. If you have a unit that was installed between 2000 & 2007, to remove the diffuser simply pry down one edge of the white trim ring using something flat such as a butter knife. Continue to work your way around the ring until you have a 1/4″ (7mm) or so gap all the way around. Then simply grab onto the edges and pull straight down. The diffuser lens can be cleaned with soap and water. To re- install the diffuser position the 4 zip style ties into the 4 holes on the ceiling ring and push up until the diffuser is flush with the ceiling. If you have a unit that was installed in 2007, simply pull the diffuser down.