How do I run a keg box using an external CO2 tank?
• On many keg coolers, there is a removable plug, or a knock out hole in the interior near the compressor enclosure. Simply remove the plug or knock out, make a hole in the insulation and run your CO2 line into the box. • After the CO2 line has been run through the hole, insulate around the hose with plumber’s putty or self expanding foam spray (Rapids 9M120). Adapting a single keg cooler to a home bar-top: Though not recommended, this can be accomplished with extreme care. You will be required to cut a hole in your bar top! • You can put your portable keg box right under the bar, line up the draft arm hole on the top of the keg box and make a same sized hole in the bar top. Add insulation to the space between the bottom of the bar and the top of the keg box. Cut a hole in the insulation, so you can look down into the box from the hole in the bar. Mount the draft arm to the bar top using the screw holes provided in the flange. • After the draft arm in mounted, take the chill tube from
