How do I run a swamp cooler?
Use of swamp coolersKeep the pads wet and the water flowing since swamp or evaporative coolers work by a fan drawing in warm air from outside and blowing it through wet pads. You can also use the fan only, especially if it’s humid or raining. Since this is not a closed system, open windows and possibly doors for air flow. Experiment to determine which windows to open and how much to open them; do not open them too far. Turn on the water pump before starting the fan so that the pads are saturated. Always ensure there’s enough water in the reservoir.MaintenanceDrain and clean your cooler of sediment regularly, which means a thorough cleaning each season, with regular checkups of the pads; periodically replace pads, filters, water reservoir and the pump about once a month; disconnect the swamp cooler first. Pads are made of wood shavings (Aspenwood is recommended since it lasts longer.), excelsior, cellulose fiber or spun aluminum or plastic pads; the last two are cheaper, but require mor