How do I set 2 or more Ultras/GyroRemotes and/or Keyboards on one computer?
The Receiver can be taught to recognize up to eight devices (mice, remotes, keyboards, etc.) on a system, but only two of those devices may be used simultaneously. When setting up a system with a single receiver and three or more devices, the following guidelines must be followed: *If setting up more than one mouse on your receiver, the mice must be on the same channel in order to function. *Select two channels that are free of outside interference and install all devices on either of those two channels. When possible, it is recommended that the two chosen channels be separated by at least one unused channel. *Any of the devices installed on one channel may be used simultaneously with any of the devices on the other channel. Two devices that share a channel may not be used simultaneously. When installing the devices try to determine which devices will be used simultaneously and set them on opposite channels. The following example describes a single-receiver system with two mice and a k
