How do I setup my NetGear router with Verizon?
BA (PPPoE) Telnet to router setup menu 1 with any system name, or blank domain name has to be your ISP i.e. “bellatlantic.com”, “verizon.net”, enter thru and save, go to menu 2, use space bar to toggle to ip address attached on LAN, type ip address of your pc i.e. “192.168.0.2”, enter thru and save. Go to menu 4, set Encapsulation to PPPoE, set login, which could be either “username” or “username@domainname”, and password, leave everything as default, dynamic ip address, sua to yes. Enter thru and do a test, you should get IPCP opened for last command. Go to menu 24.1, check for WAN IP address, if it is showing, then you can open browser. GTE (DHCP) Telnet to router setup menu 1 with any system name, or blank domain name has to be your ISP i.e. “vz.dsl.genuity.net”, enter thru and save, go to menu 2, use space bar to toggle to ip address attached on LAN, type ip address of your pc i.e. “192.168.0.2”, enter thru and save. Go to menu 4, set Encapsulation to Ethernet, login and password a
