How do I turn Ax monitor record information on and off: modes, histogram, grid lines, focus point?
The Ax has all kinds of useful information that it can display on its monitors to help you. It is useful to know how to turn that information on and off. In record mode, from a blank display, pressing the information button (i+) on top of the camera takes you through the following display sequence: • blank • detailed camera setup information, including the position of the focus area or focus point • displays the histogram as well • focus point only • blank To display the grid to assist with composing, press and hold the function button (top left) and press the information button (i+) until the desired pattern of grey lines appears. In AF S (single) or AF C (continuous) autofocus mode, press and hold the 4-way controller centre button for a couple of seconds to change the focus display to a cross to activate flex focus point mode. You can then move the flex focus point to anywhere in the display with the controller arrow keys and that becomes the autofocus point. The flex focus point ca
