Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I verify the QoS configuration on the Catalyst 2900 XL and 3500 XL series switches?

April 26, 2017catalyst configuration QoS SERIES switches verify XL

0

Posted

How do I verify the QoS configuration on the Catalyst 2900 XL and 3500 XL series switches?

1 Answer

0

Posted

A. The exec mode show interface switchport command provides the current configuration on the port. This configuration is used to verify whether you have configured the interface according to the requirement. 3548XL#show running-config interface FastEthernet 0/20 Building configuration… Current configuration: ! interface FastEthernet0/20 switchport trunk encapsulation dot1q switchport mode trunk switchport priority default 5 spanning-tree portfast end 3548XL#show interfaces FastEthernet 0/20 switchport Name: Fa0/20 Switchport: Enabled Administrative mode: trunk Operational Mode: trunk Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: Disabled Access Mode VLAN: 0 ((Inactive)) Trunking Native Mode VLAN: 1 (default) Trunking VLANs Enabled: ALL Trunking VLANs Active: 1-22,29,231,651 Pruning VLANs Enabled: 2-1001 Priority for untagged frames: 5 Override vlan tag priority: FALSE Voice VLAN: none Appliance trust: none