How do u change a headlight for 2006 chevy equinox?
Step 1 – Raise the hood and remove the 4 push-in retainers that go along the top of the front grille. These are each two part retainers – remove both parts by prying with a small screwdriver. Nothing comes off here – this just makes the grille loose for maneuvering the headlight assembly around to get it in and out. Step 2 – Remove the “bow tie” trim piece that runs from headlight to headlight thru the middle of the front grille – it is cheap plastic so do this carefully (mine looks like chrome with the Chevy ‘bow tie’ in the center). To do this, use a flat-bladed screwdriver and a rag (to protect the headlight). This trim part comes off – I started at the driver’s side and work toward the passenger side. Place the rag below the trim on the headlight. Carefully pry up on the trim piece with the screwdriver and work the trim with your fingers until it pops out of the headlight assembly catch. There are lock tabs on both the top and bottom of this trim piece when you get to the grille ar
