How Do You Add Fluid To A Manual Transmission In A 1993 Ford Probe?
Your Ford Probe is equipped with a manual transmission that allows you to shift gears manually rather than automatically. Some drivers prefer the ability to control their own shift points, as opposed to having an automatic shifter that has set shift points. The manual transmission oil fill point is in a different place than an automatic transmission, and filling it with transmission fluid requires a different procedure. Allow the vehicle to cool. Use your 3/4 inch wrench to loosen and remove the transmission fill plug by turning counterclockwise. The fill plug is on the right side of the transmission near the front of the transmission case. Check the fluid level by sticking your finger in the fill plug hole and feeling for the top level of oil. The fill point is stamped on the side of the transmission case. If the level is below this line you will need to add fluid. Position your funnel in the fill plug hole. Slowly add transmission fluid, checking frequently until the fluid level is e