How Do You Adjust A Wayne Dalton Torsion Spring Garage Door?
If you are installing a Wayne Dalton Torsion garage door for the first time, adjusting it is the last task you will do—after installing the vinyl weather stripping. Lift the door and check the balance. If the door lifts by itself or if it is hard to pull down, you will need to unwind the springs. If the door is hard to lift, or if it is too easy to pull down, you will need to wind the springs. You can adjust the spring tension on a Wayne Dalton Torsion garage door with a few simple tools. Fully close the door. Apply locking pliers to the track above the third roller. Insert a winding bar into the winding cone and push upwards on the winding bar while loosening the screws on the winding cone. Carefully adjust spring tension a quarter of a turn. Re-tighten the screws in the cone and repeat for the other side. Recheck door balance.
