How Do You Build A Jeep Hard Top Carrier?
If you ever need to detach the hard top on your Jeep and store it away, a hard top carrier will make this easier. This device will attach to the hard top’s rear panel and aid you in both detaching the top and hauling it away. You’ll basically build a sturdy frame that will support the hard top while it is turned over with wheels attached for it to roll on. Most of what you’ll need should be at any hardware or home supply store. Measure the length and height of the hard top’s rear panel. The carrier’s size should measure approximately the same dimensions as this end. It could be slightly smaller than the rear panel’s length and height but should not exceed it. Take four sturdy metal pipes or bars. Stainless steel may work best as the carrier will be exposed to the elements. Two bars should be approximately as long as the back panel’s length and two should be the same length as its height. Connect these to form a rectangle using simple bent fixtures. Foam or PVC fixtures can work as long
