How do you change brake light 2004 jeep liberty?
To change the passenger side is a slight bit more tricky as you will need to open the back door all the way to the point of being parallel to the left side of the car (or in other words – perpendicular (rt. angle) to the rear of the vehicle). After you have the back door open properly, look through from the inside the hinge area and you will see the top of two screws (the same size as the ones on the passenger side). Place your screwdriver into the head of the screw from the inside of the door and turn the screw counter-clockwise. You may want to make sure you have a magnetic screwdriver so that you don’t lose the screw into the hinge or bumper area forever and need to go buy a new screw. If you don’t have a magnetic screwdriver, you might be able to reach down inside the opening between the lens fixture and the door to hold the screw with your fingers while loosening it. After you remove both screws, you will need a wood or plastice shim to “pop” out the barbs on the lens fixture that