How Do You Check Shock Absorbers Or Macpherson Struts In A Honda Prelude?
Most cars have telescopic shock absorbers with a coil spring attached to the top. The assembly is called a Macpherson strut and it’s vital to your suspension system. If the ride in your Honda Prelude has been bumpy lately, it’s time to check the shocks and struts. Perform the bounce test. Though low-tech, this is the easiest way to determine if you need to replace your shocks and struts. Grab a fender on your Prelude and then pull it up and push it down vigorously until you get enough momentum going to make the car pitch up and down. Let go and observe the result. If your shocks and struts are in good condition, the car just bounces up and down one more time and then returns to its original position. If it continues to bounce up and down on its own after that, then you need to take a closer look. Use axle stands and car jacks to keep your chassis safely supported and the wheels hanging free. Next, remove the wheel assembly with an air ratchet or socket wrench and then set it aside. Loc