Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How Do You Connect Reliance Broadband+ Zte Modem In Linux (Using Usb_Modeswitch)?

April 26, 2017Computers Connect electronics linux modem operating Reliance SYSTEMS zte

0

Posted

How Do You Connect Reliance Broadband+ Zte Modem In Linux (Using Usb_Modeswitch)?

1 Answer

0

Posted

• Reliance ZTE Broadband+ modem Connect the modem. • Give the command #dmesg. • • Output will show USB device as CDROM • Enter The Command. • lsusb • Output: Bus 004 Device 003: ID 19d2:fff6 • Convert product id from fff6 to fff1. • Download package usb_modeswitch from • Switch to the usb_modeswitch directory as root and Enter Following commands. • make • make install • Edit file /etc/usb_modeswitch.conf in line number 592 • Uncomment the following lines • DefaultVendor= 0x19d2 DefaultProduct= 0xfff6 TargetVendor= 0x19d2 TargetProduct= 0xfff1 MessageContent=”5553424312345678c00000008000069f030000000000000000000000000000″ • Give the command #usb_modeswitch • Give parameters to kernel for identification of the modem • modprobe usbserial vendor=0x19d2 product=0xfff1 • your modem will be detected as /dev/ttyUSB?