How Do You Connect The Helios H4000 HD Upscaling DVD Player To A TV Using S-Video?
The Helios H4000 HD Upscaling DVD Player has the ability to convert standard DVD video to higher definition output for HDTVs. The DVD player may also be used with standard definition TVs. An S-Video connection will work with either type of TV, and will carry a better quality video signal than the standard composite connection. Here’s how to connect the Helios H4000 HD Upscaling DVD Player to a TV using S-Video. Use the owner’s manual to help you locate the S-Video output connector on the back of the DVD player. The output connector is located directly below the composite video connector. Determine the length of the S-Video cable you will be using. Make sure the DVD player is close enough to your TV. S-Video connectors are unidirectional, with four pins angled toward the top of the connector. Carefully plug the cable into the DVD player’s port to avoid bending the pins. Plug the cable into the S-Video port on your TV. Press the “Setup” button on the DVD player’s remote control. This wil