How Do You Custom Make Fiberglass Kick Panels?
Custom made kick panels allow you to put the speakers you want in the front of your vehicle, with this project there is no reason to settle for less than what you want for your car or truck. Gather your materials, make speaker rings for the speakers that you are putting in the kick panels by mounting the grill on a piece of MDF and use you router to cut them to size. Remove your factory kick panel. Pull the weatherstrip off in the area near the kick panel. Pull the carpet back and secure it so it doesn’t get ruined. Cover the area with aluminum foil and tape it up to hold it in place. Remove the clips from your factory kick panels and carefully poke them through the aluminum foil. Hold the factory kick panel in place over the foil and trace the edge with a Sharpie Cover the rest of your work area with a drop cloth! Rip your fiberglass mat into small manageable pieces (1-2″). Mix up a small batch of resin according to manufacturer’s instructions. Soak your fiberglass mat one piece at a