How Do You Cut Costs On Asphalting A Driveway?
Installing a driveway for a new home, or replacing an old broken driveway may be increasingly expensive. There are some ways to decrease your expense. Using asphalt instead of concrete, for example, may save you a little bit of money. Cut costs on asphalting a driveway by first making sure you prep the area properly. When grading an area for an asphalt driveway, you must insure that it is smooth and has no holes in the area you are preparing to pave. Holes cause more expense when paving. Look at putting a small layer of crush-and-run stone on the area you are asphalting. This is fairly cheap and levels out reasonably well. Crush-and-run fills holes and packs down well, providing a hard surface for the asphalt. This procedure may cut costs on asphalting a driveway because it usually takes less asphalt when you have a crush-and-run base. Make the thickness of your asphalt 3 inches instead of the standard 4 inches in order to cut costs on asphalting a driveway. Keep in mind, however, that